Surface modifications of ITO electrodes for polymer light-emitting devices

Surface modifications were performed on the indium tin oxide (ITO) substrates for polymer light-emitting devices, using the different treatment methods including solvent cleaning, hydrochloric acid treatment and oxygen plasma. The influence of modifications on the surface properties of ITO electrodes were investigated by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), contact angle, and four-point probe. The surface energies of the ITO substrates were also calculated from the measured contact angles. Experimental results demonstrate that the surface properties of the ITO substrates strongly depend on the modification methods, and oxygen plasma more effectively improves the ITO surface properties compared with the other treatments. Furthermore, the polymer light-emitting electrochemical cells (LECs) with the differently treated ITO substrates as device electrodes were fabricated and characterized. It is observed that the surface modifications on ITO electrodes have a certain degree of influence upon the injection current, luminance and efficiency, but hardly upon the turn-on voltages of current injection and light emission which are close to the measured energy gap of electroluminescent polymer. Oxygen plasma treatment on the ITO electrode yields the better performance of the LECs, due to the improvement of interface formation and electrical contact of the ITO electrode with the polymer blend in the LECs.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Enhanced cleaning of photoresist film on a transparent substrate by backward irradiation of a Nd:YAG laser

Laser cleaning of a photoresist (PR) on a glass substrate using ns-pulsed Nd:YAG laser was studied. The direction of the substrate facing the laser beam was varied as a main parameter as well as the power of the laser beam. The backward irradiation (BWI) of the third harmonic beam (355 nm) completely removed 1.2 μm thick PR layer with three pulses at 1.5 J/cm² leaving no residues behind; while the forward irradiation (FWI) at the same condition just partially cleaned it. To investigate the difference of removal mechanisms between irradiation directions, the size distributions of particulates generated during laser cleaning were observed using an optical particle counter. The concentration of micron-sized particulates increased with increasing laser fluence up to 1 J/cm² for FWI and 0.5 J/cm² for BWI and then decreased at higher fluences because the target was a very thin film. The concentration of larger particulates for BWI was much higher than that for FWI implying the difference in removal mechanisms. In consideration of the size characteristics of the particulates and the temperature profiles of the PR layer, the most probable distinct mechanism for the BWI would be a blasting due to high temperature at the PR/glass interface. The particulate number concentration decreased rapidly after the completion of cleaning, suggesting that the measurement of the particulate concentration could detect the progress of the cleaning. Our results demonstrated that the backward irradiation will be useful for the laser cleaning of film-type contaminants on an optically transparent substrate.     

Effects of UV photon irradiation on SiOx (0 < x < 2) structural properties

Thin films of a-SiO_x (0 < x < 2) were prepared by reactive r.f. magnetron sputtering from a polycrystalline-silicon target in an Ar/O₂ gas mixture. The oxygen partial pressure in the deposition chamber was varied so as to obtain films with different values of x. The plasma was monitored, during depositions, by optical emission spectroscopy (OES) system. Energy dispersive X-ray (EDX) measurements and infra-red (IR) spectroscopy were used to study the compositional and structural properties of the deposited layers.Structural modifications of SiO_x thin films have been induced by UV photons’ bombardment (wavelength of 248 nm) using a pulsed laser. IR spectroscopy and X-ray photoemission spectroscopy (XPS) were used to investigate the structural changes as a function of x value and incident energy. SiO_x phase separation by spinodal decomposition was revealed. The IR peak position shifted towards high wavenumber values when the laser energy is increased. Values corresponding to the SiO₂ material (only Si⁴⁺) have been found for laser irradiated samples, independently on the original x value. The phase separation process has a threshold energy that is in agreement with theoretical values calculated for the dissociation energy of the investigated material.For high values of the laser energy, crystalline silicon embedded in oxygen-rich silicon oxide was revealed by Raman spectroscopy.     

Liquid Nuclear Magnetic Resonance Implementation of Quantum Computation in Subspace

Based on the logical labelling method, we prepare an effective pure state in a subsystem of a three spin system via liquid nuclear magnetic resonance technique. Then with this subspace effective pure state we implement the Deutsch-Jozsa algorithm. The tomography for the subspace effective pure state and the corresponding spectrum of the output for the Deutsch-Jozsa algorithm agree with theoretical predictions, which shows that we have successfully implemented the Deutsch-Jozsa algorithm in a subsystem of a nuclear spin system and demonstrated a subspace quantum computation.     

Low-frequency noise and inelastic tunneling spectroscopy in Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) epitaxial magnetic tunnel junctions

We report on tunnelling magnetoresistance (TMR), current–voltage (IV) characteristics and low-frequency noise in epitaxially grown Fe(1 1 0)/MgO(1 1 1)/Fe(1 1 0) magnetic tunnel junctions (MTJs) with dimensions from 2×2 to 20×20 μm². The evaluated MgO energy barrier (0.50±0.08 eV), the barrier width (13.1±0.5 Å) as well as the resistance times area product (7±1 MΩ μm²) show relatively small variation, confirming a high quality epitaxy and uniformity of all MTJs studied. At low temperatures (T<10 K) inelastic electron tunneling spectroscopy (IETS) shows anomalies related to phonons (symmetric structures below 100 meV) and asymmetric features above 200 meV. We explain the asymmetric features in IETS as due to generation of electron standing waves in one of the Fe electrodes. The noise power, though exhibiting a large variation, was observed to be roughly anti-correlated with the TMR. Surprisingly, for the largest junctions we observed a strong enhancement of the normalized low-frequency noise in the antiparallel magnetic configuration. This behavior could be related to the influence of magnetostriction on the characteristics of the insulating barrier through changes in local barrier defects structure.     

An Economical Magnetocardiogram System Based on High-To SQUIDs

An economical magnetocardiogram （MCG） system is built in our laboratory. It mainly consists of a MCG data acquisition stage equipped with two high-To superconducting quantum interference device （SQUID） magnetometers, a data processing stage with digital filtering and a one-layer μ-metal magnetically shielded room in conjunction with a high-Tc SQUID based active compensation. Experimental results show that a noise level of pico-tesla in MCG profiles, which is necessary for clinical applications, may be achieved with the system. Moreover, stable and convenient operations of the system are demonstrated with simulating MCG measurements.     

ON DIRECT METHOD OF SOLUTION FOR A CLASS OF SINGULAR INTEGRAL EQUATIONS

In this article, by introducing characteristic singular integral operator and associate singular integral equations (SIEs), the authors discuss the direct method of solution for a class of singular integral equations with certain analytic inputs. They obtain both the conditions of solvability and the solutions in closed form. It is noteworthy that the method is different from the classical one that is due to Lu.     

Calculation of the surface energy of bcc transition metals by using the second nearest-neighbor modified embedded atom method

The surface energies for 24 surfaces of all bcc transition metals Fe, Cr, Mo, W, V, Nb and Ta have been calculated by using the second nearest-neighbor modified embedded atom method. The results show that, for all bcc transition metals, the order among three low-index surface energies E_(1 1 0) < E_(1 0 0) < E_(1 1 1) is in agreement with experimental results and E_(1 1 0) is also the lowest surface energy for various surfaces. So that from surface energy minimization, the (1 1 0) texture should be favorable in the bcc films. This is also consistent with experimental results. The surface energy for the other surfaces increases linearly with increasing angle between the surfaces (h k l) and (1 1 0). Therefore, a deviation of a surface orientation from (1 1 0) can be used to estimate the relative values of the surface energy.     

Determination of optical properties in nanostructured thin films using the Swanepoel method

We present the methodological framework of the Swanepoel method for the spectrophotometric determination of optical properties in thin films using transmittance data. As an illustrative case study, we determined the refractive index, thickness, absorption index, and extinction coefficient of a nanostructured 3 mol% Y₂O₃-doped ZrO₂ (yttria stabilized zirconia, 3YSZ) thin film prepared by the sol-gel method and deposited by dipping onto a soda-lime glass substrate. In addition, using the absorption index obtained with the Swanepoel method, we calculated the optical band gap of the film. The refractive index was found to increase, then decrease, and finally stabilize with increasing wavelength of the radiation, while the absorption index and extinction coefficient decreased monotonically to zero. These trends are explained in terms of the location of the absorption bands. We also deduced that this 3YSZ thin film has a direct optical band gap of 4.6 eV. All these results compared well with those given in the literature for similar thin films. This suggests that the Swanepoel method has an important role to play in the optical characterization of ceramic thin films.